Durable Trailer Loading Ramps Ramp Champ 220cm Loading Ramp Pair (2200mm x 285mm wide x 680kg) Folding Ramps Loading Ramp with Double support Bar (2200mm long x 285mm wide), 660kg Amazon.com: VEVOR Loading Ramps, 2 Pcs 108 x 15 in, Durable Aluminum. Pair of lightweight aluminium folding loading ramps with cut out grip system and double support bar underneath making them much stronger. Suitable for ride on lawnmowers, ATVs quad bikes and other wheeled garden machinery. Price is for the PAIR. Each loading ramp is 2200mm x 285mm x 100mm. Minimum load height: 520mm. Maximum load height: 660mm Weight per ramp: 8. 5kg. 680kg capacity across the pair. Specification: Each ramp is 2200mm x 285mm x 100mm 680kg capacity, across the pair load quad bikes, ATVs and ride on mowers onto your vehicle, trailer or overcome steps Multipurpose, use the ramps as a pair or as a single ramp to load motorbikes Double support bar for greater strength Folding ramp design, folds to half the length (1100mm) for easy storage and transport Slightly curved for improved ground clearance Lightweight aluminium, each ramp weighs 8. 5kg Anti slip surface with a cutout grip system to prevent slipping Smooth entrance onto the ramp due to the angled foot design Built on carry handle. Clips shut when stored No installation is required, simply rest the ramp on the step and start loading Safety straps are provided to allow you to secure the ramp to the vehicle during loading Coated rest on connection to prevent damage to the vehicle during loading Load height: The ramps can be used for loading at 520mm 660mm 680kg capacity across the pair. Please note that these ramps are unsuitable for single axle or tracked machinery or vehicles. These ramps are not suitable for commercial Industrial usage, for this use, we would recommend a solution from our professional range. Minimum tyre width 10cm The maximum load height of these folding ATV loading ramps is based on EU guidelines which recommend that loading ramps do not exceed a gradient greater than 30% or 1: 3. 3. Essentially the load height x 3. 3, gives you the required ATV loading ramp length you required for loading. Please note items with low clearance may require longer ramps